×
Home Current Archive Editorial board
News Contact

Archive

More Filters

Contents

Fly ash class F from Thermal Power Plant “Stanari” was used in combination with highly plastic brick clay from Busovača to develop building bricks. The brick clay and fly ash were characterized for chemical and mineralogical composition, grain size distribution, and specific gravity. The fly ash has a higher proportion of larger particl...

By Marina Jovanović, Adnan Mujkanović, Nadira Bušatlić, Elma Selimović

Austenitic stainless steel is mostly used at high temperatures. It is known that during heating of the austenitic stainless steel with increasing temperature and time of annealing a microstructure is changed i.e. there is the precipitation of carbides followed by precipitation of secondary phases as a sigma phase. The presence of the delta ferrite ...

By Amna Hodžić, Dejana Kasapović, Almaida Gigović-Gekić, Farzet Bikić, Raza Sunulahpašić, Hasan Avdušinović

Due to the fast process of urbanization and the increase in the development of transport infrastructure, there is an increase in noise levels caused by road and railway traffic in urban areas, which represents one of the most important today's problems. The goal of this paper is to find out the current noise levels of road and railway traffic. Meas...

By Nusret Imamović, Zijad Selimović, Haris Puščul, Emina Kadušić

Due to the very complex composition of leachate wastewater, combining two or more physical, chemical, or biological processes, carried out simultaneously or sequentially, is highly needed in order to obtain effluent suitable for further discharge into sewage. In this paper, electrocoagulation coupled with synthetic zeolite (EC-NaX), electrocoagulat...

By Nediljka Vukojević Medvidović, Ladislav Vrsalović, Sandra Svilović, Mirjana Cestarić

Water hardness and deposition of incrustation is a problem in households and industry. In this regard, several technologies have been developed with the purpose of water softening and preventing the deposition of incrustation. The ion exchange method is the most commonly used method and is considered a conventional method. However, due to the short...

By Vedran Stuhli, Armin Buljubašić, Abdel Đozić, Mirnesa Zohorović, Amra Odobašić

Sulphur in steel is an undesirable element because it lowers all technological and uses values of steel products. During the steelmaking process, the desulphurization process depends on the thermodynamic conditions, the used desulphurizes, and the stability of the formed sulphides. The desulphurization technology in the production of low-carbon ste...

By Raza Sunulahpašić, Aida Imamović, Hasan Avdušinović

The effect of partial replacement of natural filler by ground waste sulfur originated from the oil refining process on fresh and hardened properties of self-compacting concrete was investigated. Properties investigated were slump flow, V-funnel, L-box, and sieve segregation of fresh concrete mixes; and compressive, flexural, and bond (pull off) str...

By Milica Vlahović, Aleksandar Savić, Sanja Martinović, Tatjana Volkov Husović

In this paper, the adsorption properties of two metallurgical wastes (slag and anode dust) and two municipal wastes (eggshells and coffee grounds) were described. Acetic acid was used as the adsorbate Adsorption kinetic was monitored during the adsorption process. The obtained results showed that all tested waste materials can be used as potential ...

By Anita Štrkalj, Zoran Glavaš

Stainless steel X8CrNiS18-9 (standard EN 10088-3: 2005) is the most commonly used austenitic stainless steel due to its good machinability. This steel has high mechanical and working properties thanks to a complex alloying, primarily with the elements such as chromium and nickel. The content of sulphur present in the steel from 0.15 to 0.35% improv...

By Derviš Mujagić, Aida Imamović, Mustafa Hadžalić

Gallic acid is a phenolic acid widely spread in various plants, where it is present either in free form or as part of tannins, called gallotannins. It shows several positive effects on human health. It has different biological effects: antibacterial, antiviral, anti-inflammatory. Many scientists are showing great interest in gallic acid precisely b...

By Dejana Kasapović, Fehim Korać, Farzet Bikić