Home Current Archive Editorial board
About us
Aim and Scope Submissions Open Access Statement
Instructions for Authors
News Contact
×
Home Current Archive Editorial board

Aim and Scope Submissions Open Access Statement
News Contact
Issue image

VOL. 2, NO. 3 (2022)

All issues
Authors in this issue:

Abdel Đozić, Aida Imamović, Amra Odobašić, Armin Buljubašić, Armina Čamić, Derviš Mujagić, Hasan Avdušinović, Ladislav Vrsalović, Mirjana Cestarić, Mirnesa Zohorović, Mustafa Hadžalić, Nediljka Vukojević Medvidović, Raza Sunulahpašić, Sandra Svilović, Šefkija Botonjić, Vedran Stuhli,

Published: 31.12.2022.

Contents

31.12.2022. Original scientific paper
COMPARISON OF ELECTROCOAGULATION COUPLED WITH SYNTHETIC ZEOLITE, ULTRASOUND AND TWO STEPS ELECTROCOAGULATION

Due to the very complex composition of leachate wastewater, combining two or more physical, chemical, or biological processes, carried out simultaneously or sequentially, is highly needed in order to obtain effluent suitable for further discharge into sewage. In this paper, electrocoagulation coupled with synthetic zeolite (EC-NaX), electrocoagulat...

By NEDILJKA VUKOJEVIĆ MEDVIDOVIĆ, LADISLAV VRSALOVIĆ, SANDRA SVILOVIĆ, MIRJANA CESTARIĆ

31.12.2022. Original scientific paper
LEUCOBRYUM GLAUCULUM MOSS AS A BIOSORBENT FOR REMOVAL OF WATER HARDNESS

Water hardness and deposition of incrustation is a problem in households and industry. In this regard, several technologies have been developed with the purpose of water softening and preventing the deposition of incrustation. The ion exchange method is the most commonly used method and is considered a conventional method. However, due to the short...

By VEDRAN STUHLI, ARMIN BULJUBAŠIĆ, ABDEL ĐOZIĆ, MIRNESA ZOHOROVIĆ, AMRA ODOBAŠIĆ

31.12.2022. Original scientific paper
INTENSIFICATION OF LOW-CARBON STEEL DESULPHURISATION IN THE INDUCTION FURNACE

Sulphur in steel is an undesirable element because it lowers all technological and uses values of steel products. During the steelmaking process, the desulphurization process depends on the thermodynamic conditions, the used desulphurizes, and the stability of the formed sulphides. The desulphurization technology in the production of low-carbon ste...

By RAZA SUNULAHPAŠIĆ, AIDA IMAMOVIĆ, HASAN AVDUŠINOVIĆ

31.12.2022. Professional paper
INFLUENCE OF BORON, ZIRCONIUM, AND TELLURIUM ON THE IMPACT TOUGHNESS OF X8CrNiS18-9 STEEL

Steel X8CrNiS18-9 (standard EN 10088-3: 2005) is the most commonly used from the group of austenitic stainless steel in terms of machinability. The content of sulphur present in the steel from 0,15 to 0,35% has the exclusive task to improve the machinability. However, while sulphur improves machinability it simultaneously reduces the resistance of ...

By DERVIŠ MUJAGIĆ, AIDA IMAMOVIĆ, MUSTAFA HADŽALIĆ

31.12.2022. Professional paper
THE INFLUENCE OF PROCESS PARAMETERS ON BROWN STOCK PULP WASHING AT NATRON-HAYAT MAGLAJ

Brown stock washing is one of the major unit operations within the pulp manufacturing business. Poor operating washers have the potential to significantly and negatively affect almost every other area of a pulp and paper mill, including the mill’s environmental performance. The objective of the pulp washing is to remove the soluble impurities...

By ARMINA ČAMIĆ, ŠEFKIJA BOTONJIĆ

Recent issues

View Archive
Issue image
Vol 4, Issue 6, 2024
Issue image
Vol 3, Issue 5, 2023
Issue image
Vol 3, Issue 4, 2023
Issue image
Vol 2, Issue 3, 2022