The study investigates the Portevin–Le Chatelier (PLC) effect in the cold-rolled Al-Mg alloy EN AW-5754. The tensile tests were performed on dog bone specimens at test speeds of 10, 20, and 50 mm/min. Digital image correlation (DIC) and infrared thermography were used to monitor strain rate and temperature changes. The results showed a strong...

By Ivan Jandrlić, Lorena Mrkobrada

For the die industry, where future products have a decisive role in material selection, the subject of steel is an area of interest with high innovation potential. With new production and processing technologies that prioritize knowledge, the quality of materials has improved significantly, and these developments continue. Material selection in die...

By Aslan Unal

The translational symmetry of the distribution of atoms (ions) of the charge carriers (electrons or holes) system is broken by sputtering (doping) due to the existence of two boundary surfaces. This is a model of high-temperature superconductors in which the observed symmetry breaking orthogonal to the CuO plane is treated as a perturbation. Single...

By Jovan Šetrajčić, Siniša Vučenović

Metallic materials in granular packings show different electrical properties from their bulk counterparts. In this paper, we investigate the temporal evolution of the electrical conductivity of granular metals. We use metallic beads arranged in different one-, two- and three-dimensional ensembles through which different constant currents are inject...

By Maja Đekić, Ajla Karić, Amra Salčinović Fetić, Melisa Baždar, Belma Husković, Dijana Dujak, Diana Ćubela

This study investigated the mechanical properties of a series of Fe-Cr-Mn (Mo)-N alloys. The chromium content ranged from 16 to 18 mass %. The test alloys were produced by adding nitrided ferroalloys during melting in an induction furnace. Test specimens of each alloy were prepared for mechanical testing and microstructural observation. Tensile str...

By Jasmin Halilović, Edis Nasić, Derviš Mujagić

Steel 17-7PH is austenitic-martensitic steel with high strength, hardness, and resistance to creep, and corrosion. It is designed for aerospace components, but can also be used for other applications that require high strength and corrosion resistance, as well as leaf springs for operation at temperatures up to 316 °C. It can be used in a solut...

By Belma Fakić, Derviš Mujagić, Omer Beganović

Modern steel production cannot be imagined without manganese, because almost all steels contain manganese.In this paper, we present the impact of manganese on the tensile strength values of high-carbon steel. This paper presents an improvement in the quality of wire rolling with control of manganese content in steel and the value of C-equivalent, i...

By Aida Imamović, Omer Kablar, Mirsada Oruč, Vedina Purić-Selimović, Lamija Sušić

This paper describes the difference in the creep rate of pre-strained and no pre-strained samples of superalloy N07080. The primary strengthening mechanism of this superalloy is based on the precipitation of fine and coherent particles of the intermetallic γ' phase Ni3(Al,Ti) that ensure good creep resistance. In the case of additional streng...

By Omer Beganović, Belma Fakić, Derviš Mujagić

The production of concrete structural steel using controlled cooling with Tempcore technology enables the production of high-strength steel with improved adhesion to concrete while ensuring homogeneous properties for the construction of buildings, bridges, highways, and other construction facilities in any geographical environment. Concrete reinfor...

By Vedina Purić, Omer Beganović

The assessment of workplace hazards involves recognizing the likelihood of occurrence and the severity of potential injuries or occupational diseases to employees. The risk assessment is performed by a team of experts from various scientific and professional fields to objectively evaluate the attributive and/or numerically expressed level of risk, ...

By Branko Radović, Bojana Zlatković, Anica Ranđelović