This study investigated the mechanical properties of a series of Fe-Cr-Mn (Mo)-N alloys. The chromium content ranged from 16 to 18 mass %. The test alloys were produced by adding nitrided ferroalloys during melting in an induction furnace. Test specimens of each alloy were prepared for mechanical testing and microstructural observation. Tensile str...

By Jasmin Halilović, Edis Nasić, Derviš Mujagić

Steel 17-7PH is austenitic-martensitic steel with high strength, hardness, and resistance to creep, and corrosion. It is designed for aerospace components, but can also be used for other applications that require high strength and corrosion resistance, as well as leaf springs for operation at temperatures up to 316 °C. It can be used in a solut...

By Belma Fakić, Derviš Mujagić, Omer Beganović

Modern steel production cannot be imagined without manganese, because almost all steels contain manganese.In this paper, we present the impact of manganese on the tensile strength values of high-carbon steel. This paper presents an improvement in the quality of wire rolling with control of manganese content in steel and the value of C-equivalent, i...

By Aida Imamović, Omer Kablar, Mirsada Oruč, Vedina Purić-Selimović, Lamija Sušić

This paper describes the difference in the creep rate of pre-strained and no pre-strained samples of superalloy N07080. The primary strengthening mechanism of this superalloy is based on the precipitation of fine and coherent particles of the intermetallic γ' phase Ni3(Al,Ti) that ensure good creep resistance. In the case of additional streng...

By Omer Beganović, Belma Fakić, Derviš Mujagić

The production of concrete structural steel using controlled cooling with Tempcore technology enables the production of high-strength steel with improved adhesion to concrete while ensuring homogeneous properties for the construction of buildings, bridges, highways, and other construction facilities in any geographical environment. Concrete reinfor...

By Vedina Purić, Omer Beganović

The assessment of workplace hazards involves recognizing the likelihood of occurrence and the severity of potential injuries or occupational diseases to employees. The risk assessment is performed by a team of experts from various scientific and professional fields to objectively evaluate the attributive and/or numerically expressed level of risk, ...

By Branko Radović, Bojana Zlatković, Anica Ranđelović

The particle shape and size of the starting powders represent the most important physical properties, on which the quality of the compacts and final sintered products depends. Two types of powder were analyzed in the paper - electrolytic copper powder with a dendritic particle shape and water-atomized copper powder with an irregular particle shape....

By Ivana Marković, Stevan Trujić, Dragan manasijević, Ljubiša Balanović, Uroš Stamenković, Milijana Mitrović

Wet-strength paper production is of great significance due to its prominent importance in everyday consumer activities. Production of these paper types is very challenging for the manufacturer since they have to meet very specific demands. Wet-strength paper products include bags that come in contact with moisture and wet products, hygienic and kit...

By Edina Husić, Šefkija Botonjić

Polymeric materials have an important role in gluing technology due to their broad application in the wood industry, metal industry, glass, and ceramics industry as well as medicine. This article discusses the basic physicochemical aspects of bonding with adhesives and also, the mechanisms of action of the adhesive materials during bonding based on...

By Šaćira Mandal, Aida Šapčanin

The paper presents an examination of the possibility of applying raspberry fruit extract (Rubus idaeus L.) as a green inhibitor of general corrosion of copper in 3% NaCl. Raspberry fruits (Rubus idaeus L.) sort Polka was collected from the Starposle near Kakanj, Bosnia and Herzegovina. Raspberry fruit extracts in ethanol were obtained by the Soxhle...

By Dejana Kasapović, Fehim Korać, Farzet Bikić