POLYMERIC MATERIALS IN GLUING TECHNIQUES
Polymeric materials have an important role in gluing technology due to their broad application in the wood industry, metal industry, glass, and ceramics industry as well as medicine. This article discusses the basic physicochemical aspects of bonding with adhesives and also, the mechanisms of action of the adhesive materials during bonding based on...
By Šaćira Mandal, Aida Šapčanin
INVESTIGATION OF INHIBITORY EFFECT OF THE RASPBERRY FRUIT EXTRACT (Rubus idaeus L.) ON CORROSION OF COPPER IN 3% NaCl SOLUTION
The paper presents an examination of the possibility of applying raspberry fruit extract (Rubus idaeus L.) as a green inhibitor of general corrosion of copper in 3% NaCl. Raspberry fruits (Rubus idaeus L.) sort Polka was collected from the Starposle near Kakanj, Bosnia and Herzegovina. Raspberry fruit extracts in ethanol were obtained by the Soxhle...
By Dejana Kasapović, Fehim Korać, Farzet Bikić
ADSORPTION OF Cu(II) IONS USING FOUNDRY WASTE
This article deals with the analysis of the adsorptive properties of the waste produced during the shot blasting of castings in foundries. During this process, particles of moulding mixture and scale that remained on the surface of the casting after removal from the mould are removed. Since this waste contains particles of moulding mixture (SiO2, c...
By Anita Štrkalj, Zoran Glavaš
CALCULATION OF THERMAL CONDUCTIVITY FOR CRYSTALLINE NANOSTRUCTURES
We have introduced a theory for the calculation of thermodynamic characteristics for some characteristic nanostructures (ultrathin films and superlattices), using the adapted method of two-time temperature Green's functions. In this paper, he has determined the coefficient of thermal conductivity using the definition of free energy and then compare...
By Siniša Vučenović, Jovan Šetrajčić
CATECHOLASE ACTIVITY AND SUBSTITUENT EFFECT OF NEW HOMOLEPTIC COPPER(II) CHALCONE COMPLEXES
Three new neutral complexes of copper(II) containing chalcone ligands derived from 2'-hydoxyacetophenone and 4-substituted benzaldehydes were synthesized. Complexes were prepared by solution synthesis and characterized by spectroscopy. The catalytic activity of complexes was examined in the reaction of 3,5-di-tertbutylcatehcol (DTBC) oxidation. The...
By Selma Hadžalić, Irnesa Osmanković, Adnan Zahirović
TELLURIUM MICROALLOYING OF AUSTENITE STAINLESS STEEL X8CrNiS18-9
More recently modified stainless steels have been used to produce various structural elements that work in complex operating conditions. Stainless steel X8CrNiS18-9 (standard EN 10088-3) is the most commonly used from the group of austenitic stainless steel in terms of machinability. This steel has high mechanical and working properties thanks to a...
By Derviš Mujagić, Omer Beganović, Belma Fakić
ON ONE ASPECT OF SUSTAINABLE MANUFACTURING Power Consumption vs Productivity
The paper presents one aspect of the analysis of energy consumption and productivity of the manufacturing operation. As an example of the operation, the operation of turning with a single-blade tool was taken. Sustainable development in its general concept implies sustainable materials, sustainable design, and sustainable manufacturing. This paper ...
By Edin Begovic, Ibrahim Plancic, Sabahudin Ekinovic, Vedran Mizdrak
INTENSIFICATION OF LOW-CARBON STEEL DESULPHURISATION IN THE INDUCTION FURNACE
Sulphur in steel is an undesirable element because it lowers all technological and uses values of steel products. During the steelmaking process, the desulphurization process depends on the thermodynamic conditions, the used desulphurizes, and the stability of the formed sulphides. The desulphurization technology in the production of low-carbon ste...
By Raza Sunulahpašić, Aida Imamović, Hasan Avdušinović
INFLUENCE OF BORON, ZIRCONIUM, AND TELLURIUM ON THE IMPACT TOUGHNESS OF X8CrNiS18-9 STEEL
Steel X8CrNiS18-9 (standard EN 10088-3: 2005) is the most commonly used from the group of austenitic stainless steel in terms of machinability. The content of sulphur present in the steel from 0,15 to 0,35% has the exclusive task to improve the machinability. However, while sulphur improves machinability it simultaneously reduces the resistance of ...
By Derviš Mujagić, Aida Imamović, Mustafa Hadžalić
THE INFLUENCE OF PROCESS PARAMETERS ON BROWN STOCK PULP WASHING AT NATRON-HAYAT MAGLAJ
Brown stock washing is one of the major unit operations within the pulp manufacturing business. Poor operating washers have the potential to significantly and negatively affect almost every other area of a pulp and paper mill, including the mill’s environmental performance. The objective of the pulp washing is to remove the soluble impurities...
By Armina Čamić, Šefkija Botonjić