Specific environmental conditions, such as marine environments, often influence steel applications in marine industries. These conditions are commonly simulated using a NaCl solution to simplify the study and eliminate the complexities of seawater's chemical and biological variability. In this study, 42CrMo4 steel samples, a widely utilized material in components subjected to static and dynamic stresses found in vehicles, engines, and machinery, were selected for analysis due to their susceptibility to various forms of corrosion. The corrosion behavior of the samples was monitored using mass loss and corrosion rate. The results were then correlated with changes in mechanical properties, including tensile strength and Brinell hardness. The study provides insight into how corrosion impacts the degradation of mechanical properties.
Harsimran, K., Santosh, K., & Rakesh. (n.d.). Overview of corrosion and its control a critical review. Proceedings on Engineering Sciences, 13–24.
Wasim, M., Shoaib, S., & Mubarak, N. (2018). Factors influencing corrosion of metal pipes in soils. Environmental Chemistry Letters, 861–879.
Nieves-Mendoza, D., Gaona-Tiburcio, C., Hervert, H., Mendez, R., Castro-Borges, P., Borunda, A., Robledo, P., & F. (2012). Almeraya-Calderón, Identifying Factors Influencing the Corrosion Rate of Steel Using Nonparametric Statistics. International Journal of Electrochemical Science, 6343–6352.
Berradja, A. (2019). Electrochemical Techniques for Corrosion and Tribocorrosion Monitoring: Methods for the Assessment of Corrosion Rates. In Corrosion Inhibitors. IntechOpen. https://doi.org/10.5772/intechopen.86743
Rathod, N., Asce, & Moharana, N. (2015). Advanced methods of corrosioon monitoring-A review. International Journal of Research in Engineering and Technology, 413–420.
ASTM International, A. C. G.-1 on corrosion of metals. (2003). Standard practice for preparing, cleaning, and evaluating corrosion test specimens.
Martinović, S., Alil, A., Milićević, S., Živojinović, D., Volkov, T., & Husović. (2023). Morphological Assessment of Cavitation Caused Damage of Cordierite and Zircon Based Materials Using Principal Component Analysis. Engineering Failure Analysis, 147.
Vlahović, M., Alil, A., Devečerski, A., Živojinović, D., & Volkov-Husović, T. (2023). Non-Destructive Examination for Cavitation Resistance of Talc-Based Refractories with Different Zeolite Types Intended for Protective Coatings. Materials, 1–20.
ISO 6892-1:2016, M. E. I. 6892-1. (n.d.). Metallic materials - Tensile testing - Part 1: Method of test at room temperature, 2016. 1.
Metallic materials - Brinell hardness test - Part 1: Test method,. (2016). SRPS EN ISO 6506-1, ISO 6506-1:2016.
Citation
Funding Statement
This work was supported by the Ministry of Science, Technological Development and Innovation of the Republic of Serbia (Contract No. 451-03-136/2025-03/200135 and 451-03-136/2025-03/200026)
The statements, opinions and data contained in the journal are solely those of the individual authors and contributors and not of the publisher and the editor(s). We stay neutral with regard to jurisdictional claims in published maps and institutional affiliations.
